North Building Technologies

The Zip M7011A is a 3 digital input, 4 digital output and 2 analogue input module. Each of the 3 digital inputs is designed to connect directly to a volt-free switch. The switch reads 'off' when the switch is open, and 'on' when the swich is closed. Each input has an on-board red LED that is lit when the input is on.

Each of the 4 digital outputs is capable of handling 277VAC @ 10A or 28VDC @ 10A. Each output has an on-board red LED that is lit when the output is on.

Each of the 2 analogue inputs is designed to be used with a 10K3A thermistor for temperature reading.

With flexibility in mind

• Integrates seamlessly with hvac, access control and other building control and monitoring systems
• Up to 3 digital inputs can be provided by a single module
• Up to 4 digital outputs can be provided by a single module
• Up to 2 analogue inputs can be provided by a single module
• All inputs can generate alarms
• Relay outputs can be used as normally open or normally closed
• Relay outputs can switch mains power
• Analogue inputs are preconfigured to be used with a 10K3A thermistor

Economical to apply

• Low-cost Zip-based solution
• Already proven technology
• Employs off-the-shelf contacts for inputs

The M7011A relies on a proven RS485 network for communications between the modules and a ZipMaster. Compass, one version of the ZipMaster, sits on an RS485-based integration network which is compatible with over 200 different building-control systems, including CCTV, bms, security, lighting and many international standards. Another version of the ZipMaster, Commander, serves information directly onto IP as HTML web pages and can send alarm messages via e-mail.

Product Codes

ZIP/M7011A Zip 3 digital input, 4 digital output, 2 analogue input module (din-rail mount)

Search the North e-Library for more information and technical documentation on the Zip M7011A data acquisition module.

M7004A | M7011B

---

---