North | Products | Zip M7101A door access overview

M7101A Door Access Control module

The M7101A is a fixed function Zip module designed to control a door. It has a Wiegand input for an HID (or similar) reader, tamper switch, request to exit input and an output capable of driving a 500kg holding force magnetic lock. It also has a fire over ride input which is hardwired to the lock output.

The 7101a uses a Commander, Integrator or ObSys 2.0 Tokenmax module to get authentication when a card is presented. The Zip network allows up to 16 7101a's to be daisy-chained back to a Commander, Integrator or ObSys 2.0. The TokenmAx module in ObSys and Integrator can handle up to 2000 Users (or "tokens").

With flexibility in mind

Integrates seamlessly with central HVAC, access control and other building control and monitoring systems
Chassis enclosure is monitored for tampering
Compatible with all Weigand compliant card readers
Anti-passback available
Users can be stored in a TokenMax module or module/s
Lock and Door timers have adjustable time-periods
Alarms can be generated on reader use, door state, tamper, RTE, and lock state
Up to 2 Request to Exit (RTE) inputs can be connected
Door contact can be added for monitoring purposes
More than one door can be controlled by a single door controller
External tamper can be connected if the module is to be mounted in a secondary enclosure
Can be connected to other door access controllers for central monitoring
Built-in NetCard for easier installation

Economical to apply

Low-cost Zip-based solution
Already proven technology
Employs off-the-shelf card-readers and contacts for external hardware
ZipMaster can hold user tokens for smaller systems

A full graphical user interface for the system is available in either web server or stand alone application form using the ObSys 2.0 software suite. This allows the adding and deleting of cards, time control functions and also the ability to see who is in the building and in what location at any one time.